GraphicAir Model A300S/A200S
Printable PDF Specs
FEATURES
These units are recirculatory; i.e. filtered air is exhausted back into the workplace.
Comprising: Particulate filter to 5.0 microns - Carbon impregnated fibre filter - Axial fan(s), external rotor motor type (Model A200S has two fans), brushless UL, VDE and CSA approved - Sealed electrical wiring and switch, downstream of filters - Steel construction finished in dove grey - Plastic replaceable Spray/Fume Shield - Backstand.
| Dimensions | A300S | A200S |
|---|---|---|
| H x W x D | 385 x 580 x 350 | 515 x 790 x 430 |
ART & GRAPHICS APPLICATIONS
Reclining position (on back-stand) - for light aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. Model A300S will accommodate artwork up to A3 size and A200S up to A2 size. For fume/vapour adsorption and dilution.
HOBBIES, MODELLING & CRAFT APPLICATIONS
Upright position: - for applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fume and gases from other sources can be dispersed.
Optional accessories available are HEA3 (A300S) and HEA2 (A200S) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles.
These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate. (See extraction cabinets A300S-D, A200H-D & A100H-D for complete vapour extraction or TechFlo range for higher specification filtration.)
| MODEL NO | FAN MOTOR * | AVERAGE AIR VELOCITY AT FILTER FACE | AVERAGE AIR VELOCITY AT HOOD FACE |
|---|---|---|---|
| A300S | 230V 50Hz 40W | 0.50m/sec 98ft/min | 0.25 m/sec 49ft/min |
| A200S | 230V 50Hz 80W | 0.50m/sec 98ft/min | 0.35 m/sec 69ft/min |
* 110V 60Hz available if required.
WEIGHT: S500 = 10kg S600 = 19kg
Detailed Dimensions:- A300S = A, A200S = B
FILTRATION
The particulate filter (Ref. 5 below) is a three stage, graduated fibre filter. The open structure of the first stage discourages surface loading and promotes depth filtration, ensuring a high dust holding capacity and reducing resistance to airflow. The denser backing filter and final scrim material provides finer filtration to 5 micron. NB: Spray particulate size varies from 10 to 20 microns.
An optional pleated, HEPA filter to 0.3 microns is available for high-grade filtration, typically to arrest solder fume (smoke) particulates ranging in size from 0.3 to 10 microns. NB: Solder fume consists of 95% particulates and 5% gases.
The carbon impregnated fibre filter (Ref. 4 below) assists in reducing solvent odours and gases. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.
| Ref No | Description | Part Number |
|
|---|---|---|---|
| A300S | A200S | ||
| 1 | Backstand/Carry Handle | ||
| 2 | Handwheels M6 x 4 | P5004 | P5004 |
| 3 | Fan Housing/Mounting | P1001 | P1002 |
| 4 | Carbon Impregnated Fibre Filter | CHA3 | CHA2 |
| 5 | Particulate (Intake) Filter to 5 micron | IFA3 | IFA2 |
| Particulate (Intake) Filter to 0.3 micron (Opt.) | HEA3 | HEA2 | |
| 6 | Filter Retainer | P2001 | P2002 |
| 7 | Spray/Fume Shield (Plastic) | P3001 | P3002 |
