GraphicAir Model A300S-D
Printable PDF Specs
FEATURES
These units exhaust air via flexi-duct externally to atmosphere.
Comprising: Particulate filter to 5 microns - Centrifugal blower, brushless, external rotor motor type. UL, VDE and CSA approved - Sealed electrical wiring and switch, downstream of filters - 2 metre x 100mm flexi-duct - All Steel construction - finished in dove grey - plastic replaceable hood/shield.
Art & Graphics applications
Reclining position: - For aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size.
Hobbies, Modelling & Craft Applications
Upright position: - For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fumes, vapours and fine dusts and powders from other sources can also be extracted.
These units are designed for immediate operator protection whereby large particulates (> 5 microns) are filtered and fine particulates (< 5 microns) together with gases, vapours and fumes within the spray/fume shield are exhausted to atmosphere via the flexi-duct.
| Dimensions | A300S-D |
|---|---|
| H x W x D | 600 x 680 x 530 |
| MODEL NO | FAN MOTOR * | AVERAGE AIR VELOCITY AT FILTER FACE | AVERAGE AIR VELOCITY AT HOOD FACE |
|---|---|---|---|
| A300S-D | 230V 50Hz 105W | 0.60m/sec 118ft/min | 0.55m/sec 108ft/min |
* 110V 60Hz available if required.
WEIGHT: A300S-D= 10kg
Art & Graphics applications
Reclining position: - For aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size.
Hobbies, Modelling & Craft Applications
Upright position: - For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fumes, vapours and fine dusts and powders from other sources can also be extracted.
FILTRATION
These units are designed for immediate operator protection whereby large particulates (> 5 microns) are filtered and fine particulates (< 5 microns) together with gases, vapours and fumes within the spray/fume shield are exhausted to atmosphere via the flexi-duct.
| Ref No | Description | Part Number |
|---|---|---|
| A300S-D | ||
| 1 | 2m Flexi Duct | |
| 2 | Fan (Blower) Housing/Mounting | P3001-D |
| 3 | Particulate (Intake) Filter to 5 micron | IFA3 |
| 4 | Spray/Fume Shield | P3002 |
