Ceramics
GraphicAir Models A300S/A200S A200H/A100H A300S-D A200H-D/A100H-D
When working close up on fine artwork, protection against gases vapours and dusts is a priority. Many general every day products used for cleaning, painting, curing, glueing etc, contain harmful elements that may potentially cause illness or injury. If these products are used in conjunction with a GraphicAir filtration/extraction system exposure levels will be reduced to within the levels as laid out in current health & safety legislation and ensure your compliance to COSHH guidelines.
GraphicAir Range Features:
Two sizes, Low noise. Easy Filter Change, Centrifugal Blowers, Powder Coated steel construction
Virtually maintenance free, No installation costs, Single phase supply, Low power consumption, Lifetime Warranty*
We have listed below the models we feel are the most appropriate for ceramics work. Click on the image or the text links to obtain full details of each unit.
You will find units for low use and units for high use in a small unventillated room. Please bear in mind that if possible, a unit which would duct to the outside atmosphere would be the most efficient.
| Model # Dimensions |
Brief Description | |
|---|---|---|
|
385x580x350 |
For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fume and gases from other sources can be dispersed. These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate. (See extraction cabinets A300S-D, A200H-D & A100H-D for complete vapour extraction or TechFlo range for higher specification filtration.) |
|
515x790x430 |
||
 |
680x660x450 |
General-purpose workstation for aerosol spray filtration and fine particulate, fume and vapour extraction. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H-D) or A1 (A100H-D) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates prototypes, models, ceramics, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded, etc. |
|
960x800x620 |
||
|
680x660x450 |
General-purpose workstation for light aerosol spray and airbrush use and fume /vapour adsorption and dilution. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H) or A1 (A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use |
|
960x800x620 |
||
| A300S-D 680x660x450 |
For applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size.
For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fumes, vapours and fine dusts and powders from other sources can also be extracted. |
