Conservation & Restoration
GraphicAir Models A300S/A200S A200H/A100H A300S-D A200H-D/A100H-D
When cleaning and restoring various types of objects and artefacts, you and your staff need to have the maximum amount of freedom of movement and dexterity. With GraphicAir at source, benchtop air filtration & extraction systems, you get this and also the satisfaction and comfort from knowing that you are offering the best protection against air borne particles given off when brushing, sanding, cleaning applying resins and glues etc. These can be in the form of dusts, fumes, gases and vapours which can be potentially harmful if not extracted away from the breathing zone.
COSHH requires employers to control exposures to hazardous substances to protect both employees and others who may be exposed from work activities.
We have listed below the models we feel are the most appropriate for the above applications. Click on the image or the text links to obtain full details of each unit.
You will find units for low use and units for high use in a small unventillated room. Please bear in mind that if possible, a unit which would duct to the outside atmosphere would be the most efficient.
| Model # Dimensions |
Brief Description | |
|---|---|---|
|
385x580x350 |
For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fume and gases from other sources can be dispersed. These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate. (See extraction cabinets A300S-D, A200H-D & A100H-D for complete vapour extraction or TechFlo range for higher specification filtration.) |
|
515x790x430 |
||
 |
680x660x450 |
General-purpose workstation for aerosol spray filtration and fine particulate, fume and vapour extraction. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H-D) or A1 (A100H-D) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates prototypes, models, ceramics, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded, etc. |
|
960x800x620 |
||
|
680x660x450 |
General-purpose workstation for light aerosol spray and airbrush use and fume /vapour adsorption and dilution. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H) or A1 (A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use |
|
960x800x620 |
||
| A300S-D 680x660x450 |
For applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size.
For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fumes, vapours and fine dusts and powders from other sources can also be extracted. |
