Education
GraphicAir Models A300S / A200S A200H / A100H A200H-D / A100H-D
With ever increasing Health & Safety legislation and the need to conform to COSHH regulations, it is essential that classroom staff and pupils are protected whilst performing tasks as part of their project work. Technicians especially are exposed at length, to potentially harmful air borne contaminants such as aerosol adhesives, aerosol paints, lacquers, resins, fixatives, airbrush sprays and solder fumes to name a few. By using a GraphicAir cabinet, then you are sure that exposure levels to all these are below the recommended levels and in some cases almost eliminated.
Widely used in Education for Design Technology, Art, Craft & Science applications. Their robust, powder coated construction, as well as the fact that there are no expensive installation and maintenance costs, makes them the number one choice for schools, colleges and universities.
We have listed below the models we feel are the most appropriate inEducation environmments. Click on the image or the text links to obtain full details of each unit.
You will find units for low use and units for high use in a small unventillated room. Please bear in mind that if possible, a unit which would duct to the outside atmosphere would be the most efficient.
| Model # Dimensions |
Brief Description | |
|---|---|---|
|
385x580x350 |
For applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fume and gases from other sources can be dispersed. These units are designed for immediate operator protection from airborne particulate matter, solvent vapour and gas. They are not recommended for continual usage, ie production applications, particularly in confined and/or badly ventilated work areas where potentially harmful solvent vapours and gases may accumulate. (See extraction cabinets A200H-D & A100H-D for complete vapour extraction or TechFlo range for higher specification filtration.) |
|
515x790x430 |
||
 |
680x660x450 |
General-purpose workstation for aerosol spray filtration and fine particulate, fume and vapour extraction. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H-D) or A1 (A100H-D) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates prototypes, models, ceramics, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded, etc. |
|
960x800x620 |
||
|
680x660x450 |
General-purpose workstation for light aerosol spray and airbrush use and fume /vapour adsorption and dilution. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H) or A1 (A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use |
|
960x800x620 |
