General Office
GraphicAir Models A300S / A200S A200H / A100H A200H-D / A100H-D
TechFlo Models T660H-C / T930H-C T660H-D / T930H-D
With ever increasing Health & Safety legislation and the need to conform to COSHH regulations, it is essential that staff are protected. The capture of airborne pollutants at source, benefits both employer and employee. The reduced need for general ventillation decreases heat loss and energy costs. Risk of damage by pollutants to computers and peripheral equipment is eliminated .
Recommended for use when using potentially harmful air borne contaminants such as aerosol adhesives, aerosol paints, lacquers, resins, fixatives, airbrush sprays, etc. By using a GraphicAir cabinet, then you are sure that exposure levels to all these are below the recommended levels and in some cases almost eliminated.
We have listed below the models we feel are the most appropriate for the above applications. Click on the image or the text links to obtain full details of each unit.
You will find units for low use and units for high use in a small unventillated room. Please bear in mind that if possible, a unit which would duct to the outside atmosphere would be the most efficient.
| Model # Dimensions |
Brief Description | |
|---|---|---|
|
A300S |
For applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. Model A300S will accommodate artwork up to A3 size and A200S up to A2 size. For fume/vapour adsorption and dilution. Upright position: - for applying aerosol and airbrush sprays to 3D items (models etc) and artwork. Solder fume and gases from other sources can be dispersed. |
A200S |
||
 |
A200H-D |
General-purpose workstation for aerosol spray filtration and fine particulate, fume and vapour extraction. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H-D) or A1 (A100H-D) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates prototypes, models, ceramics, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded, etc. |
A100H-D |
||
|
A200H |
General-purpose workstation for light aerosol spray and airbrush use and fume /vapour adsorption and dilution. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H) or A1 (A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use |
A100H |
||
|
T660H-C |
Highly efficient recirculatory workstation for aerosol spray filtration and fine particulate, fume and vapour extraction. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (T660H-C) or A1 (T930H-C) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates prototypes, models, ceramics, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded, etc. |
T930H-C |
||
|
T660H-D |
General-purpose ducted workstation for aerosol spray filtration and fine particulate, fume and vapour extraction. For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 (A200H-D) or A1 (A100H-D) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates prototypes, models, ceramics, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded, etc. |
T930H-D |
