Photography
GraphicAir Models A300SD A200H-D / A100H-D A200H / A100H
In a busy studio, there is the potential for a build up of vapours and fumes given off from chemicals used in developing as well as fixatives and aerosol adhesives used for display mounting and framing.
GraphicAir extraction systems protect against potentially harmful fumes, gases and vapours which may cause illness or injury. They also protect peripheral equipment from damage. By bringing exposure levels down to within those set out in Health & Safety legislation you are fulfilling you commitments as far as the COSHH regulations are concerned, but more importantly you will have a healthier working environment for your staff.
We have listed below the models we feel are the most appropriate for the above applications. Click on the image or the text links to obtain full details of each unit.
You will find units for low use and units for high use in a small unventillated room. Please bear in mind that if possible, a unit which would duct to the outside atmosphere would be the most efficient.
| Model # Dimensions |
Brief Description | |
|---|---|---|
|
|
565x390x430 |
Reclining position: - For aerosol spray and airbrush use. E.g. for applying aerosol adhesives, lacquers, fixatives, airbrush sprays etc, to artwork placed directly onto the particulate filter face. The unit will accommodate artwork up to A3 size. |
 |
680x660x450 |
For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. (board not supplied) |
|
960x800x620 |
||
|
680x660x450 |
For applying aerosol adhesives, lacquers fixatives and airbrush sprays to artwork placed onto a standard A2 drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. (board not supplied) |
|
960x800x620 |
